User Manual

Command Descriptions
DIAg:RESUlt:
FLAg? (Query Only)
Returns the Pass/Fail status from the last diagnostic test sequence execution (those
run automatically at power on, or those requested through the Service Menu). Use
the DIAg:RES
Ult:LOG? query to determine which test(s) has failed.
Group
Calibration a nd Diagnostic
Syntax
DIAg:RESUlt:FLAg?
Returns
PASS means that the oscilloscope passes all diagnostic tests.
FAIL means that the oscilloscope has failed at least one of the diagnostic tests.
Examples
DIAg:RESUlt:FLAG
Returns either PASS or FAIL.
DIAg:RESUlt:LOG? (Query Only)
Returns the internal results log from the la st diagnostic test sequence execution
(those run automatically at power on, or those requested through the Service
Menu). The list contains all modules and module interfaces that were tested with
the pass or fail status of each.
Group
Calibration a nd Diagnostic
Syntax
DIAg:RESUlt:LOG?
Returns
<QString> in the following format:
<Status>,<Module name>[,<Status>,<Module name>...]
Examples
DIAG:RESULT:LOG? might return " PASS-CPU, PASS-ACQ1,
PASS-EXTENSION"
for power-up diagnostics.
DISplay? (Query Only)
Returns the current display settings.
2-68 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer