User Manual

Command Descriptions
Arguments
OFF deactivate
s the Autorange feature.
ON activates the Autorange feature.
<NR1> = 0 deactivates the Autorange feature.
<NR1> ≠ 0 activates the Autorange feature.
Examples
AUTORANGE:STATE ON starts the Autorange function.
AUTORANGE:STATE? returns 0 or 1, depending on whether the Autorange
function is on.
AUTORange:SETTings
Controls the parameters that the Autorange function can adjust. It is equivalent to
the option buttons in the Autorange menu.
Conditions
This command applies to the TDS1000B, TDS2000B, TDS2000C, and TPS2000
Series only.
Group
Miscellaneous
Syntax
AUTORange:SETTings { HORizontal | VERTical | BOTH }
AUTORange:SETTings?
Related Commands
AUTORange:STATE
Arguments
HORizontal allows Autorange to adjust the horizontal, but not vertical, settings.
VERTical allows Autorange to adjust the vertical, but not horizontal, settings.
BOTH allows Autorange to adjust both the horizontal and vertical settings.
Examples
AUTORANGE:SETTINGS VERTICAL turns on the Autorange vertical settings.
AUTORANGE:SETTINGS? might return VERTICAL, indicating that Autorange
will only adjust the vertical settings.
AUTOSet (No Query Form)
Causes the oscilloscope to adjust its vertical, horizontal, and trigger controls to
display a stable waveform. This command is equivalent to pushing the front-panel
AUTOSET button.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-37