User Manual

Command Descriptions
<Command> is th
e command that caused the error and may be returned when a
command error is detected by the oscilloscope. As much of the command is
returned as possible without exceeding the 60 character limit of the <Message>
and <Command> strings combined. The command string is right-justified.
Examples
ALLEV? might return the following string: ALLEV 2225,"MEASUREME NT
ERROR, NO WAVEFORM TO MEASURE; ",420,"QUERY UNTERMINATED; "
AUTORange (No Query Form)
Returns current AUTORange settings.
Conditions
This command applies to the TDS1000B, TDS2000B, TDS2000C, and TPS2000
Series only.
Group
Miscellaneous
Syntax
AUTORange
Examples
AUTORANGE? might return AU TORANGE:SETTINGS BOTH;STATE 1, indicating
that Autorange is active and adjusting both the horizontal and vertical settings.
AUTORange:STATE
Toggles Autorange off and on.
Conditions
This command applies to the TDS1000B, TDS2000B, TDS2000C, and TPS2000
Series only.
Group
Miscellaneous
Syntax
AUTORange:STATE { OFF | ON | <NR1> }
AUTORange:STATE?
Related Commands
AUTORange:SETTings
2-36 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer