User Manual

Command Groups
Table 2-20: PictBridge commands (cont.)
Command Description
PICTBridge:IMAGESIZE Set or query the image size
PICTBridge:PAPERTYPE Set or query the paper type
PICTBridge:PRINTQUAL Set or query the print quality
PICTBridge:DATEPRINT Set or query the date print
PICTBridge:IDPRINT Set or query the ID print
Power and Battery-Related Commands (TPS2000 Only)
Power and Battery-Related commands provide battery management functions to a
TPS2000 oscilloscope.
Table 2-21: Power and Battery-Related commands (TPS2000 only)
Command Description
POWer?
Return all power parameters
POWer:AC:PRESENt?
Return whether the oscilloscope is being
powered by battery or AC
POWer:BATTERY<x>:GASgauge?
Return the charge remaining in battery x
POWer:BATTERY<x>:STATUS? Return status for battery x
POWer:BATTERIES:TIME?
Return the time remaining in both batteries
POWer:BUTTONLIGHT Turn the lighted front-panel buttons on and
off
Power Measurement (TPS2000 with TPS2PWR1 Power Analysis Application Key
Installed Only)
Power Measurement commands provide power measurements to a TPS2000
oscilloscope with the TPS2PWR1 Power Analysis application software key
installed.
Table 2-22: Power Measurement commands (TPS2000 with TPS2PWR1 only)
Command Description
HARmonics?
Return all harmonic parameters
HARmonics:ENABle
Set or query the harmonics menu on and off
HARmonics:FREquency? Return the frequency of the selected
harmonic
HARmonics:HRMS? Return the frequency of the selected
harmonic
2-20 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer