User Manual

Command Groups
Table 2-14: Hard Copy commands (cont.)
Command Description
HARDCopy:BUTTON Set or query the hard copy button function
For TDS1000B, TDS2000B, TDS 2000C, and
TPS2000, set or query the PRINT button
function
HARDCopy:FORMat Set or query the hard copy output format
HARDCopy:INKSaver Set or query the hard copy ink saver option
HARDCopy:LAYout Set or query the hard copy orientation
HARDCopy:PORT Set or query the hard copy port for output:
RS232, GPIB, Centronics, or USB
Horizontal Commands
Horizontal commands control the time bases of the oscilloscope. You can set the
position and time per division of both the main and window time bases. You
can substitute SECdiv for SCAle in all appropriate horizontal commands. This
prov
ides program compatibility with previous Tektronix digitizing oscilloscopes.
Table 2-15: Horizontal commands
Command Description
HORizontal?
Return horizontal settings
HORizontal:DELay? Return all settings for the window time base
HORizontal:DELay:POSition
Position window
HORizontal:DELay:SCAle Set or query the window time base
time/division
HORizontal:DELay:SECdiv Same as HORizontal:DELay:SCAle
HORizontal:MAIn? Return the main time base time/division
HORizontal:MAIn:POSition Set or query the main time base trigger point
HORizontal:MAIn:SCAle Set or query the main time base time/division
HORizontal:MAIn:SECdiv Same as HORizontal:MAIn:SCAle
HORizontal:POSition Set or query the position of waveform to
display
HORizontal:RECOrdlength? Return waveform record length
HORizontal:SCAle Same as H ORizontal:MAIn:SCAle
HORizontal:SECdiv Same as HORizontal:MAIn:SCAle
HORizontal:VIEW Select view
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-15