User Manual

Command Groups
Table 2-13: File System commands (cont.)
Command Description
FILESystem:CWD Set or query the current CF card or USB
flash drive directory
FILESystem:DELEte Delete specified file on the CF card or USB
flash drive
FILESystem:DIR? Return a list o f files in current CF card or
USB flash drive directory
FILESystem:FORMat Format the CF card or USB flash drive
FILESystem:FREESpace? Return free space on the CF card or USB
flash drive
FILESystem:MKDir Create a new directory on the CF card or
USB flash drive
FILESystem:REName Assign new name to specified file on the CF
card or USB flash drive
FILESystem:RMDir Delete specified directory
File System Conven tions
Use the following conventions when specifying file paths and file names::
The default folder (directory) is A:\.
File and folder names have a maximum of 11 characters; eight characters,
followedbyaperiod,followedbyuptothreecharacters. Thisformatis
referred to as 8.3 naming.
Wild card characters (*, %, ) are not v alid characters in file or path names.
Lists the Windows-generated short file and folder names for long file or folder
names c reated on PC Windows operating systems.
Hard Copy Commands
The hard copy commands let you control the format of hard copy output, and the
starting and stopping o f hard copies.
NOTE. TDS2000C, TDS1000B and TDS2000B oscilloscopes include PictBridge
commands to provide additional control of the hard copy format.
Table 2-14: Hard Copy commands
Command Description
HARDCopy Start or terminate hard copy
2-14 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer