User Manual

Command Groups
Data Logging C
ommands
Data logging c ommands let you direct the oscilloscope to automatically collect
data over a period of time.
Table 2-11: Data logging commands
Command Description
DATALOGging?
Return all the data logging parameters
DATALOGging:DURAtion Set the duration of the data logging
DATALOGging:SOURCE Set up the data logging source
DATALOGging:STATE Turn on or off the data logging feature
Display Commands
Display commands let you change the graticule style, displayed contrast, and
change other display attributes.
Table 2-12: Display commands
Command Description
DISplay?
Return display settings
DISplay:BRIGHTness Set or query the LCD display brightness
DISplay:CONTRast Set or query the LCD display contrast
DISplay:FORMat Set or query the Y T or XY display
DISplay:INVert Set or query the normal or inverted
monochrome display
DISplay:PERSistence Set or query the accumulate time
DISplay:STYle Set or query the waveform display style
File System Commands (TDS2MEM Module, TDS1000B, TDS2000B, TDS2000C,
and TPS2000 Only)
File system commands perform file management tasks on the C ompactFlash (CF)
card of TPS2000 oscilloscopes, and TDS models with a TDS2MEM module; and
on USB fl ash drives of TDS2000C, TDS1000B and TDS2000B oscilloscopes.
Table 2-13: File System commands
Command Description
FILESystem? Return the current working directory (CWD)
and CF card or USB flash drive free space
values
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-13