User Manual

Command Descriptions
WFMPre:BYT_Nr
Sets or queries the data width for the waveform to be transferred. This command
is equivalent to DATa:WIDth. Changing WFMPre:BYT_Nr also changes
WFMPre:BIT_Nr and DATa:WIDth.
Group
Waveform
Syntax
WFMPre:BYT_Nr <NR1>
WFMPre:BYT_Nr?
Related Commands
Arguments
<NR1> is an integer in the range of 1 to 2 that sets the number of bytes per point.
Examples
WFMPRE:BYT_NR specifies that there are 2 bytes per waveform data point.
WFMPre:BYT_Or
Sets or queries which byte of binary waveform data is transmitted first during
a waveform data transfer w hen DATa:WIDth or WFMPre:BYT_Nr is set to
2, or WFMPre:BIT_Nr is set to 16. Changing WFMPre:BYT_Or changes
DATa:ENCdg.
Group
Waveform
Syntax
WFMPre:BYT_Or { LSB | MSB }
WFMPre:BYT_Or?
Related Commands
Arguments
LSB selects the least significant byte to be transmitted first.
MSB selects the most significant byte to be transmitted first.
Examples
WFMPRE:BYT_OR MSB specifies that the most significant byte in the waveform
data is transferred first.
WFMPRE:BYT_OR? returns either MSB or LSB depending on which data byte
is transferred first.
2-184 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer