User Manual

Command Descriptions
*TRG (No Q uery
Form)
(Trigger) Exec utes commands that are definedby*DDT.
Group
Miscellaneous
Syntax
*TRG
Examples
*TRG immediately executes all commands definedby*DDT.
TRIGger
Forces a trigger event to occur. When used as a query, TRIGger? returns the
current trigger settings.
Group
Trigger
Syntax
TRIGger FORCe
TRIGger?
Arguments
FORCe creates a trigger event. If TRIGger:STATE is REAdy, the acquisition
will complete; otherwise this command will be ignored. This is equivalent to
selectingFORCE TRIGon the front panel.
Examples
TRIGGER FORCE forces a trigger event to occur.
TRIGGER? might return the following string: TRIGGER:MAIN:MODE
AUTO;TYPE EDGE;LEVEL 0.0E0;HOLDOFF :VALUE
5.0E-7;:TRIGGER:MAIN:EDGE :SOURCE CH1;COUPLING DC;SLOPE
RISE;:TRIGGER:MAIN:VIDEO: SOURCE CH1;SYNC FIELD;POLARITY
NORMAL
TRIGger:MAIn
Sets the oscilloscope trigger level to 50% of the minimum and maximum values
of the signal. Returns the current main trigger settings when used as a query.
Group
Trigger
2-166 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer