User Manual

Command Descriptions
RECAll:WAVEF
orm (No Query Form)
Recalls a stored waveform from the CompactFlash card (TDS 2MEM and
TPS2000 Series only), or from the USB flash drive (TDS1000B, TDS2000B, and
TDS2000C Ser
ies only) into a reference location.
Conditions
This command applies to the TDS2MEM, TDS1000B, TDS2000B, TDS2000C,
and TPS2000 Series only.
Group
Save and Recall
Syntax
RECAll:WAVEForm <file path>,REF<x>
Related Commands
SAVe:WAVEform
Arguments
<file p ath> is a quoted string that de fines the location and name of the
waveform file to recall. If you do not specify a path to the folder, the oscilloscope
looks for the file in the current working folder. The current folder refers to the
name of a folder as returned by the FILESystem:CWD query.
REF<x> is the oscilloscope reference memory location in which to load the
waveform. You must load a saved waveform into a reference memory location
before displa ying the waveform.
Examples
RECALL:WAVEFORM "A:\TST-PRD\TST-01.CSV", REFC loads the waveform
file TST-01.CSV into reference memory RefC. Then use SELect:REFC to display
this waveform.
REM (No Query Form)
Specifies a comment. This line is ignored by the oscilloscope.
Group
Miscellaneous
Syntax
REM <QS tring>
Arguments
<QString> is a string that can have a maximum of 80 characters.
Examples
REM "This is a comm ent" is ignored by the oscilloscope.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-139