User Manual

Command Descriptions
POWer:BUTTON
LIGHT
Turns the lights on the front-panel buttons of the TPS2000 on and off.
Conditions
This command applies to the TPS2000 Series only.
Group
Power and Battery-Related
Syntax
POWer:BUTTONLIGHT <NR1> | ON | OFF
POWer:BUTTONLIGHT?
Arguments
ON or <NR1> ≠ 0 turns the lights on.
OFF or <NR1> = 0 turns the lights off.
Examples
POWER:BUTTONLIGHT ON sets the front-panel button lights to on.
POWerANALYSIS:SOUrces
Sets or queries the Power Analysis sources. This command is equivalent to setting
the Sources option in the Power Analysis menu. It does not affect the sources for
any cus tomer-visible PI measurements.
Conditions
This command applies to the TPS2000 Series only.
Group
Power Measurement
Syntax
POWerANALYSIS:SOUrces { CH1CH2 | CH3CH4 }
POWerANALYSIS:SOUrces?
Arguments
CH1CH2 selects Channel 1 and Channel 2 as the power analysis source.
CH3CH4 selects Channel 3 and Channel 4 as the power analysis source.
NOTE. The "CH3CH4" argument is only valid for instruments with four channels.
Examples
POWERANALYSIS:SOURCES CH1CH2 specifies Channel 1 and Channel 2 as the
power analysis source.
POWERANALYSIS:SOURCES? might return CH1CH2.
2-136 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer