User Manual

Command Descriptions
Group
PictBridge
Syntax
PICTBridge:DATEPRINT { DEFLT | OFF | ON }
PICTBridge:DATEPRINT?
Arguments
DEFLT will match the default setting of the printer: on or off.
ON prints the date and time on the hard copy.
OFF does not print the date and time.
Examples
PICTBRIDGE:DATEPRINT? might return ON if the printer is set to print the date
and time.
PICTBridge:IDPRINT
Sets the o scilloscope m odel and serial number to be printed on the hard copy if
the feature is a vailable on the compatible printer. This command is equivalent to
setting the ID Print option in the UTILITY > Options > Printer Setup > PRINT
Button > Prints menu of TDS1000B, TD S2000B, and TDS2000C oscilloscopes.
Conditions
This command applies to the TDS1000B, TDS2000B, and TDS2000C Series only.
Group
PictBridge
Syntax
PICTBridge:IDPRINT { DEFLT | OFF | ON }
PICTBridge:IDPRINT?
Arguments
DEFLT will match the default setting of the printer: on or off.
ON prints the model and serial number on the hard copy.
OFF does not print the model and serial number.
Examples
PICTBRIDGE:IDPRINT? might return ON if the printer is set to print the model
and serial number.
POWer? (Query Only)
Returns the current POWer measurement settings.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-133