User Manual

Command Descriptions
*OPC? might ret
urn
1 to indicate that all pending OPC operations are finished.
PICTBridge:DEF (No Query Form)
Sets the arguments for all PictBridge commands to their default values. The
default values are the same as the default settings for the printer. This command
is equivalent to setting all the options to default in the UTILITY > Options >
Printer Setup > PRINT Button > Prints menu of TDS1000B, TDS2000B, and
TDS2000C oscilloscopes.
NOTE. The HARDCopy:BUTTON, HARDCopy:INKSaver, and
HARDCopy:LAYOUT c ommands apply to the TDS1000B, TDS2000B, and
TDS2000C oscilloscopes.
Conditions
This command applies to the TDS1000B, TDS2000B, and TDS2000C Series only.
Group
PictBridge
Syntax
PICTBridge:DEF
Examples
PICTBRIDGE:DEF sets the parameters for the compatible printer to the default
values.
PICTBridge:PAPERSIZE
Sets the paper size of the hard copy from those available on the compatible printer.
This command is equivalent to setting the Paper Size option in the UTILITY
> Options > Printer Setup > PRINT Button > Prints menu of TDS1000B,
TDS2000B, and TDS2000C oscilloscopes.
Conditions
This command applies to the TDS1000B, TDS2000B, and TDS2000C Series only.
Group
PictBridge
Syntax
PICTBridge:PAPERSIZE { DEFLT | L | L2 | HAGAKIPCARD |
MM54BY86 | MM100BY150 | IN4BY6 | IN8BY10 | LETTE R | IN11BY17
|A0|A1|A2|A3|A4|A5|A6|A7|A8|A9|B0|
B1|B2|B3|B4|B5|B6|B7|B8|B9|ROLL89MM|
ROLL127MM | ROLL100MM | ROLL210MM }
PICTBridge:PAPERSIZE?
2-130 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer