User Manual

Command Descriptions
other values ar
e entered the oscilloscope rounds the value of <NR3> to the nearest
valid zoom factor.
Examples
MATH:FFT:VERTICAL:SCALE 5 sets the FFT waveform vertical zoom factor
to X5.
MATH:FFT:VERTICAL:SCALE? might return 2.0E0, indicating that the zoom
factor setting is X2.
MATH:VERtical? (Query Only)
Returns the MATH:VERtical display settings.
Group
Math
Syntax
MATH:VERtical?
Examples
MATH:VERTICAL?? might return MATH:VERTICAL:POSITION 0.0E0;SCALE
5.0E-1
, indicating the math waveform position and scale.
MATH:VERtical:POSition
Sets or returns the math waveform display position.
Conditions
This command applies to the TDS1000B, TDS2000B, TDS2000C, and TPS2000
Series only.
Group
Math
Syntax
MATH:VERtical:POSition <NR3>
MATH:VERtical:POSition?
Arguments
<NR3> specifies the math v ertical position in divisions from center screen.
Examples
MATH:VERTICAL:POSITION might return -3.0E0, indicating that the math
waveform is 3 divisions below center screen.
2-11 8 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer