User Manual

Command Descriptions
MATH:DEFINE "F
FT (CH1, HANNING)"
sets the math waveform to display an
FFT of channel 1 using a Hanning window.
NOTE. You can use this example with TDS1000, TDS2000, TDS1000B,
TDS2000B, TDS2000C, and TPS2000 Series oscilloscopes, as well as a
TDS200 Series oscilloscope with a TDS2MM measurement module.
MATH:FFT? (Query Only)
NOTE. You can use this command with TDS1000, TDS2000, TDS1000B,
TDS2000B, TDS2000C, and TPS2000 oscilloscopes, as well as a TDS200
oscillos
cope with a TDS2MM measurement module.
Returns the current MATH:FFT display settings.
Group
Math
Syntax
MATH:FFT?
Examples
MATH:FFT? might return the following: MAT
H:FFT:HORIZONTAL:POSITION
5.0E1;SCALE 1.0E0;:MATH:FF T:VERTICAL:POSITION 0.0E 0;SCALE
1.0E0
MATH:FFT:HORizontal:POSition
NOTE. You can use this command with TDS1000, TDS2000, TDS1000B,
TDS2000B, TDS2000C, and TPS2000 oscilloscopes, as well as a TDS200
oscilloscope with a TDS2MM measurement module.
Sets or queries the FFT math waveform horizontal position.
Group
Math
Syntax
MATH:FFT:HORizontal:POSiti on <NR3>
MATH:FFT:HORizontal:POSiti on?
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-115