User Manual

Command Descriptions
LIMit:STOPAf
ter:VIOLation
Sets or returns the limit test stop after violation setting. The test will automatically
stop after it detects the specified number of violations.
Group
Limit Test
Syntax
LIMit:STOPAfter:VIOLation <NR3>
LIMit:STOPAfter:VIOLation?
Related Commands
LIMit:STOPAfter:MODe, LIMit:STOPAfter:TIMe, LIMit:STOPAfter:WAVEform
Arguments
<NR3> is the number of violations to detect before stopping the limit test.
Examples
LIMIT:STOPAFTER:VIOLATION 10
sets the limit test to run until it detects 1 0 violations.
LIMit:STOPAfter:WAVEform
Sets or returns the setting for the limit test stop after waveform function. The test
will automatically stop when it tests the specified number of waveforms.
Group
Limit Test
Syntax
LIMit:STOPAfter:WAVEform <NR3>
LIMit:STOPAfter:WAVEform
Related Commands
LIMit:STOPAfter:MODe, LIMit:STOPAfter:TIMe, LIMit:STOPAfter:VIOLation
Arguments
<NR3> is the number of waveforms to test before stopping the limit test.
Examples
LIMIT:STOPAFTER:WAVEFORM 1000
sets the limit test to run until it has tested 1000 waveforms.
LIMit:TEMPLate (No Query Form)
Uses the values specified by LIMit:TEMPLate:SOUrce,
LIMit:TEMPLate:TOLerance:HORizontal, and
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-109