User Manual

Command Descriptions
LIMit:COMpar
e
Sets or returns the template against which to compare the waveform acquired
through the specified channel. The template can be a waveform saved in any of
the referenc
e locations REF1 through REF4.
Group
Limit Test
Syntax
LIMit:COMpare :REF<x>
LIMit:COMpare?
Related Commands
LIMit:TEMPLate
Arguments
REF<x>isareferencewaveform,where<x>is1,2,3,or4.
Examples
LIMIT:COMPARE REF1
specifies REF1 as the template waveform against which to comp
are waveforms
acquired on the specified channel.
LIMIT:COMPARE?
might return:
REF4, indicating that waveforms acquired will be compared to the
limit test template waveform stored in REF4.
LIMit:RESUlt:FAIL? (Query Only)
Returns the number of failure cases.
Group
Limit Test
Syntax
LIMit:RESUlt:FAIL?
Related Commands
LIMit:RESUlt:PASS?, LIMit:RESUlt:TOTAL?
Examples
LIMIT:RESULT:FAIL?
might return: 25, indicating that 25 test cases were detected as failing.
2-104 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer