User Manual

Command Descriptions
NOTE. *IDN? mus
t be the last command when part of a concatenated statement.
Otherwise the oscilloscope generates event message 440.
The *IDN? and
ID? responses are slightly different.
Group
Miscellaneous
Syntax
*IDN?
Related Commands
Returns
Returns the oscilloscope identification in the following format for TDS2CM,
TDS2CMA, and TDS2MM modules:
TEKTRONIX, <model number>,CF:91.1CT FV:v<oscilloscope firmware version
number>,TDS2XX:XXV:v<module firmware version number>
Where XX is the module type CM (TDS2CM or TDS2CMA communications
module) or MM (measurement module).
Returns the oscilloscope identification in the following format for TDS2MEM
modules:
TEKTRONIX, <model number>,CF:91.1CT TDS2MEM:FV:v<module firmware
version number>
Returns the oscilloscope identification in the following format for TPS2000
oscilloscopes:
TEKTRONIX,<model number>,CF:91.1CT FV:v<oscilloscope firmware version
number> TPS2XXXV:v<module firmware version number>
Returns the oscilloscope identification in the following format for TDS1000B,
TDS2000B, and TDS2000C oscilloscopes:
TEKTRONIX/<model number>,<serial number>, CF:91.1CT FV:v<oscilloscope
firmware version number>
Examples
*IDN? might return the following response with a TDS2CMA installed: ID
TEKTRONIX,TDS 220,0,CF:91 .1CT FV:v2
.12 TDS2 CM:CMV: v1.04
*IDN?
might return the following response with a TDS2MEM installed: ID
TEKTRONIX,TDS 2022,0,CF:9 1.1CT TDS
2MEM:FV:v6.00
*IDN?
might return the following response for a TPS2012 oscilloscope
with a TPS2PWR1 power analysis modul
e installed:
TEKTRONIX,TPS
2012,0,CF:91.1CT FV:V9.48 TPS2PWR1:V1.00
2-102 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer