User Manual

Command Descriptions
HORizontal:M
AIn:SCAle
Sets the time per division for the main time base. This command is equivalent to
setting SEC/DIV when Main is selected from the Horizontal menu.
G
roup
Horizontal
Syntax
HORizontal:MAIn:SCAle <NR3>
HORizontal:MAIn:SCAle?
Arguments
<NR3> is the time per division. The range depends on the oscilloscope model.
The acceptable values are in a 1-2.5-5 sequence. Other values are forced to the
closest acceptable value.
Examples
HORIZONTAL:MAIN:SCALE 2.5E-6 sets the main scale to 2.5ms per division.
HORizontal:MAIn:SECdiv
Sets the time per division for the oscilloscope main time base. This command is
identical to the H ORizontal:MAIn:SCAle command. It is provided to maintain
program compatibility with some older models of Tektronix oscilloscopes.
Group
Horizontal
Syntax
HORizontal:MAIn:SECdiv
HORizontal:POSition
Sets or queries the main time base horizontal position. This command is identical
to the HORizontal:MAIn:POSition command. This command is included for
compatibility.
Group
Horizontal
Syntax
HORizontal:POSition <NR3>
HORizontal:POSition?
2-98 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer