User Manual

Command Descriptions
HORizontal:M
AIn? (Query Only)
Returns all settings for the oscilloscope main time b ase. The
HORizontal:MAIn:SECdiv and HORizontal:MAIn:SCAle commands are
identical so
only HORizontal:MAIn:SCAle is returned.
Group
Horizontal
Syntax
HORizontal:MAIn?
Returns
All settings for the main time base.
Ex
amples
HORIZONTAL:MAIN? might return HORIZONTAL:MAIN:POSITION
0.0E0;SCALE 5.0E-4
HORizontal:MAIn:POSition
Sets or queries the main time base horizontal position. This command is
equivalent to adjusting the Horizontal Position when Main is selected from the
Horizontal menu.
Horizontal
Group
Horizontal
Syntax
HORizontal:MAIn:POSition <NR3>
HORizontal:MAIn:POSition?
Arguments
<NR3> is the position in seconds. This value is the difference between the trigger
point and the center graticule. Positive values place the trigger before the center
graticule.
Examples
HORIZONTAL:MAIN:POSITION 2.0E-6 sets the main trigger position to 2 ms
before the center graticule.
HORIZONTAL:MAIN:POSITION? might return -1.0E-3, indicating that the main
trigger position is 1 ms after the center graticule.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-97