User Manual

Command Descriptions
Examples
HORIZONTAL:DE
LAY:POSITION 2.0E-6
sets the window position to 2 ms before
the center g raticule.
HORIZONTAL:D
ELAY:POSITION
? might return -1.0E-3, indicating that the
window position is 1 ms after the center graticule.
HORizontal:DELay:SCAle
Sets the time per division for the oscilloscope window time base. This command
is equivalent to setting SEC/DIV when Window Zone or Window is selected from
the Horizontal menu.
Group
Horizontal
Syntax
HORizontal:DELay:SCAle <NR3>
HORizontal:DELay:SCAle?
Arguments
<NR3> is the time per division. The range depends on the oscilloscope model.
The acceptable values
are in a 1-2.5-5 sequence. If the window time base scale is
set slower than the main time base scale, both the main and window time base
scales are set to the window scale value.
Examples
HORIZONTAL:DELAY:SCALE 2.0E-6 sets the window scale to 2ms per division.
HORIZONTAL:DELAY:SCALE 9.0E-6 sets the window scale to 10ms per d ivision.
Since 9 μs is not a correct value within the 1-2.5-5 sequence, it is automatically
set to the cl osest correct value.
HORIZONTAL:DELAY:SCALE? might return 1.0E-3, indicating that the window
scale is 1 ms per division.
HORizontal:DELay:SECdiv
This command is identical to the HORizontal:DELay:SCAle. It is provided
to maintain program compatibility with some older m odels of Tektronix
oscilloscopes.
Group
Horizontal
Syntax
HORizontal:DELay:SECdiv
2-96 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer