User Manual
Command Descriptions
Returns
<NR3>
Examples
HARMONICS:HRMS? might return 6.1826722 1409E-1.
HARmonics:PERCent? (Query Only)
Returns the amplitu
de of the s elected harmonic as a percent of the fundamental.
Group
Power Measurement
Syntax
HARmonics:PERCent?
Related Commands
Examples
HARMONICS:PERCENT? might return 5.0, indicating that the amplitude of the
selected harmonic as a percent of the fundamental frequency is 5.0%.
HARmonics:PHAse? (Query Only)
Returns the phase of the selected harmonic, in degrees, relative to the fundamental.
Group
Power Measurement
Syntax
HARmonics:PHAse?
Examples
HARMONICS:PHASE? might return 45.0, indicating that the phase o f the selected
harmonic, relative to the fundamental frequency, is 45 degrees.
HARmonics:RMS? (Query Only)
Returns the amplitude of the harmonics source in RMS. This may be V
rms
or I
rms
depending on the type of source waveform.
Group
Power Measurement
Syntax
HARmonics:RMS?
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-89