User Manual

Command Descriptions
Examples
HARDCOPY:INKS
AVER
? might return ON.
HARDCopy:LAYout
Selects the printing orientation. This command is equivalent to setting the Layout
option in the
UTILITY > Options > Hard Copy Setup menu.
NOTE. This command also controls the format of saved images.
Only TDS10
00B, TDS2000B, and TDS2000C oscilloscopes are compatible with
PictBridge printers. When printing to a PictBridge printer, the printer determines
the orienatation and will override the argument.
Group
Hard copy
Syntax
HARDCopy:LAYout { LANdscape | PORTRait }
HARDCopy:LAYout?
Arguments
LANdscape specifies that the bottom of the hard copy is along the long side
of the piece of paper.
PORTRait specifies that the bottom of the hard copy is along the short side of the
piece of paper. This is the standard format.
Examples
HARDCOPY:LAYOUT might return PORTRAIT as the page layout format of the
hard copy output.
HARDCopy:PORT
Selects where to send the hard copy data when the oscilloscope receives the next
HARDCOPY STARt command. This command is equivalent to setting the Port
option in the UTILITY > Options > Hard Copy Setup menu.
NOTE. The TDS1000B, TDS2000B, and TDS2000C oscilloscopes provide
PictBridge printer support through a USB Device port on the rear of the
oscilloscope. (See page 2-19, PictBridge Commands (TDS2000C, TDS1000B
and TDS2000B Only).)
Group
Hard copy
2-86 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer