User Manual

Command Descriptions
NOTE. The TDS10
00B, TDS2000B, and TDS2000C oscilloscopes provide
PictBridge printer support through a USB Device port on the rear of the
oscilloscope. (See page 2-19, PictBridge Commands (TDS2000C, TDS1000B
and TDS2000B Only).)
The HARDCopy:FORMat is always Exif/JPEG when printing to a PictBridge
printer.
For TDS1000B, TDS2000B, and TDS2000C oscilloscopes, use the
HARDCopy:FORMat command to set the file format when saving an image to
aUSBflash drive or over USBTMC.
Group
Hard copy
Syntax
HARDCopy:FORMat { BMP | BUBBLEJet | DESKJet | DPU3445 |
DPU411 | DPU412 | EPSC60 | EPSC80 | EPSIMAGE | EPSOn |
INTERLEAF | JPEG | LASERJet | PCX | RLE | THINKjet | TIFF }
HARDCopy:FORMat?
Arguments
BMP sets the hard copy output format to Microsoft Windows Bitmap format.
BUBBLEJet (TDS1000, TDS2000, and TPS2000 Series only) sets the ha
rd copy
output format to Canon Bubblejet format.
DESKjet (TDS200, TDS1000, TDS2000, and TPS2000 Series only) se
ts the hard
copy output format to HP De skJet format.
DPU3445 (TDS1000, TDS2000, and TPS2000 Series o nly), DPU411,
and
DPU412
set the hard copy output format to Seiko formats.
EPSC60 sets the hard copy output to Epson C60 model printer fo
rmat. Available
on TDS1000 and TDS2000 models with firmware versions 2.12 or greater
(two channel models) or 4.12 or greater (four channel models), any firmware
version with a TDS2CMA, TDS2CMAX, or TDS2MEM module installed, or the
TPS2000 Series.
EPSC80 sets the hard copy output to Epson C80 model printer format. Available
on TDS1000 and TDS2000 series models with firmware versions 2.12 or greater
(two channel models) or 4.12 or greater (four channel models), any firmware
version with a TDS2CMA, TDS2CMAX, or TDS2MEM module ins
talled, or the
TPS2000 Series.
EPSIMAGE sets the hard copy format data to Postscript
format.
EPSOn (TDS200, TDS1000, TDS2000, and TPS2000 Series only) sets the hard
copy output format to 9-pin or 24-pin dot matrix prin
ter format.
INTERLEAF (TDS200 Series only) sets the hard copy format data to Interleaf
file format.
2-84 TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer