User Manual

Command Descriptions
HARDCopy:BUT
TON
Sets or returns the current PRINT front-panel button function.
NOTE. This command does not affect the HARDCopy STARt command.
Conditions
This command applies to the TDS2MEM, TDS1000B, TDS2000B, TDS2000C,
and TPS2000 Series only.
Group
Hard copy
Syntax
HARDCopy:BUTTON { PRINTS | SAVESAll | SAVESImage }
HARDCopy:BUTTON?
Arguments
PRINTS sets the PRINT button to send the screen image to the current printer
port, using the current printer format.
SAVESAll sets the PRINT button to s ave all active oscilloscope information
(waveforms, screen image, settings) to files in a new subfolder in the current
CompactFlash card folder (TDS2MEM and TPS2000 Series only), or in the
current USB flash drive folder (TDS1000B, TDS2000B, and TDS2000C Series
only).
SAVESImage sets t he PRINT button to save the screen image to a file on the
CompactFlashcardorontheUSBflash drive.
Examples
HARDCOPY:BUTTON SAVESIMAGE sets the front-panel PRINT button to save
the screen image to a file when pushed.
HARDCopy:FORMat
Sets the hard copy output data format. This command is the same as setting the
Format option in the UTILITY > Options > Hard Copy or Printer Setup menu,
depending on your oscilloscope model.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-83