User Guide

Command Descriptions
Arguments
{30|60|90|120
| 150 | 180 | 210 | 240 | 270 | 300 | 330 | 360 | 390 | 420 | 450
| 480 } is the data logging time period, in minutes.
Examples
DATALOGGING:DURATION 30
enables data logging to last for 30 minutes.
DATALOGging:SOURCE
Sets up the data logging source.
Group
Data Logging
Syntax
DATALOGging:SOURCE { CH<x> | MATH }
Related Commands
DATALOGging:DURAtion, DATA LOGging:STATE
Arguments
CH<x>isachannel,where<x>is1,2,3,or4.
MATH is the M ATH channel.
Examples
DATALOGGING:SOURCE CH1
sets up CH1 as the source location from which to log data.
DATALOGging:STATE
Turns on or off the data logging feature.
Group
Data Logging
Syntax
DATALOGging:STATE
DATALOGging:STATE { OFF | ON | 0 | 1 }
Related Commands
DATALOGging:DURAtion, DATALOGging:SOURCE
Arguments
OFF or <NR1> = 0 turns off the data logging function.
ON or <NR1> ≠ 0 turns on the data
logging function.
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-65