User Guide

Command Descriptions
Examples
LIMIT:TEMPLAT
E:DESTINATION REF2
specifies that the template waveform referred to with the LIMit:TEMPLate
APPLY command is stored as the REF2 waveform.
LIMit:TEMPL
ate:SOUrce
Sets or returns the source channel or math waveform that LIMit:TEMPLate
APPLY will use in deriving the limit test template waveform.
Group
Limit Test
Syntax
LIMit:TEMPLate:SOUrce { CH<x> | MATH }
LIMit:TEMPLate:SOUrce?
Related Commands
LIMit:TEMPLate, LIMit:TEMPLate:DESTination, LIMit:TEMPLate:
TOLerance:HORizontal, LIMit:TEMPLate:TOLerance:VERTical
Arguments
CH<x> specifiesthatthetemplatewaveformsourceisthewaveformcurrently
being acquired using the specified channel.
MATH specifies the template waveform source channel as the math waveform.
Examples
LIMIT:TEMPLATE:SOURCE CH2
specifies that the template waveform for limit tests is the waveform currently
acquired using channel 2.
LIMIT:TEMPLATE:SOURCE?
might return CH2, specifying that the template waveform source for limit tests is
the waveform c ur
rently stored as the channel 2 waveform.
LIMit:TEMPLate:TOLerance:HORizontal
Sets or returns the amount, in units of horizontal divisions, by which the source
waveform is varied horizontally when creating the destination template waveform.
Group
Limit Test
Syntax
LIMit:TEMPLate:TOLerance:H ORizontal <NR3>
LIMit:TEMPLate:TOLerance:H ORizontal?
TDS200, TDS1000/2000, TDS1000B/2000B, TDS2000C, TPS2000 Programmer 2-111