User Manual

Accessories and Options
3” Grou nd Lead
Use the ground lead for general,
lower-frequency pro bing.
1. Connect the male end of the lead to the
ground socket on the probe.
2. Connect the socketed end of the lead to
any of the probe t ips or adapters. You can
also connect to 0.025 inch square pins in
your circuit.
When selecting the grounding co nnection,
maintain as short a ground path as possible.
(See page 43, Probe Grounding.)
Two ground leads are included with the probe.
Reorder Tekt ronix part number:
196-3437-10 qty. 2
TDP0500 & TDP1000 Quick Start User Manual 33