User Manual

Accessories and Options
SMT KlipChip
Use the SMT KlipChip test clips t o access
dense circuitry and IC leads spaced down to
10 mil-centers.
NOTE. This adapter performance is best
below 100 MHz. We recommend that you use
the 250 MHz bandwidth filter with this adapter.
1. Press the Y-lead into the handle of the
KlipChip test clip.
2. Turn the KlipChip body to allow better
probe o rientation .
3. If necessary, bend the flexible sleeve of
the KlipChip up to a 35 ° angle to reduce
stress on the connection.
Three adapters are included with the probe.
Reorder Tekt ronix part numbers:
206-0364-XX qty. 1
SMG50 qty. 20
32 TDP0500 & TDP1000 Quick Start User Manual