User Manual

Accessories and Options
Y-Lead Adapter
Use the Y-lead adapter to extend the reach of
the probe and to connect to 0. 025 inch square
pins spaced as far as 1.5 inches apart.
NOTE. This adapter p erformance is best
below 250 MHz. We recommend that you use
the 250 MHz bandwidth filter with this ad apter.
The Y-lead adapter acce pts any of the probe
tips or adapters.
1. Push the adapter into the probe until it is
seated.
2. Connect the adapter to your circuit o r
to another ad apter, such as the SMT
KlipChip.
Two adapters are included with th e probe.
Reorder Tektronix part number:
196-3434-XX qty. 1
TDP0500 & TDP1000 Quick Start User Manual 31