User Manual
Accessories and Options
Longhorn Adapter
This accessory has fine pins for probing circuit
board through-holes (vias). The pin spacing
adjusts from 0 to 0.35 in.
WARNING. The pins h ave sharp points. To
prevent injury, use care when you handle the
adapter.
1. Push the adapter into the probe until it is
seated. Do not force the tip.
2. Adjust the s pa cing between the pins to suit
your needs.
3. Probe your circuit.
Two adapters are included with the p robe.
Reorder Tekt ronix part number:
016-1780-XX qty. 5
TDP0500 & TDP1000 Quick Start User Manual 29