User Manual

Calibration
Calibration
The probe calibration routine minimizes your measurement errors by optimizing the gain and offset of the probe and oscilloscope
combination. We recomme nd that you r epeat the probe calibration on each channel that you use. Individual calibration constants
are stored for each probe on each channel.
NOTE. Probe calibration functions are not available on all oscilloscope models.
Prerequisites
The e quipment must be warmed up for 20 minutes, and the calibration status of t he host instrument m ust be pass.
Required Equipment
The r equired equipment for calibration is the same a s for the functional check. (See page 9, Required Equipment.)
TDP0500 & TDP1000 Quick Start User Manual 11