User Manual

Functional Check
Functional Check
Use the following procedure to check that your probe is funct ioning properly. If you want to verify that your probe meets the warranted
specifications, refer to the Performance Verification procedures in the TDP0500 & TDP1000 Probes Technical Reference Manual.
Required Equipment
Description and quantity Performance requirement Recommended example
1
Oscilloscope TekVPI Interface Tektronix DPO7000 Series
Y-lead adap ter
0.25-in square pins for probe tip
connections
196-3434-XX
2
SMT KlipChip adapters (2)
0.25-in square pins-to-mini clips 206-0364-XX
2
1
Nine-digit part numbers (xxx-xxxx- xx) are Tektronix part numbers.
2
Standard probe accessory
TDP0500 & TDP1000 Quick Start User Manual 9