User Manual

Installation
Menu Button
1. Press the probe Menu b utton to display the
Probe Control screen on the oscilloscope.
NOTE. Probe menu screens vary slightly
between oscilloscope series; DPO7000 Series
screens are shown here.
This screen includes controls for probe
functions that are not accessible on the probe,
such as AutoZero and Offset. Other functions,
such as Bandwidth Limit, can be con trolled
from both locations.
2. Use the touch-screen buttons on the
instrument to set the probe pa rameters.
3. Press the probe Menu buttonagainto
close the Probe C ontrol screen.
8 TDP0500 & TDP1000 Quick Sta rt User Manual