User Manual

Installation
Probe Controls and Indicators
Range Button and LEDs
When the probe is powered on, all L EDs briefly
light during the p ower-on self test routine, and
then one of the Range LEDs remains lit. This
indicates that the probe is in normal operating
mode.
Press the Range button to toggle the range
selection. The corresponding LED lights to
indicate the selected range.
NOTE. The host instrument sets all probe
settings to the last known state for the
probe/channel combination. If none of the
Range LEDs are lit, the instrume nt may have
detected an error condition. Disconne ct and
reconnect th e probe to clear the error.
TDP0500 & TDP1000 Quick Start User Manual 5