User Manual

Installation
Installation
Connecting to the Host Instrument
WARNING. Your TekVPI instrument may
require a firmware upgrade to support full
functionality of the TDP0500 and TDP1000
probes. Before you connect the probe, check
the version re quirements. (See page 45, Host
Instrument Firmw are.)
1. Slide the probe into the TekVPI receptacle.
The probe snaps when fully en gaged .
When you connect th e probe, the host
instrument reads information from the
probe and identifies the probe type.
2. To disconnect, press the latch release
button and pull away from the instrumen t.
4 TDP0500 & TDP1000 Quick Sta rt User Manual