User Manual

Preface

Returning the Probe for Servicing

If your probe requires servicing, you must return the probe to Tektronix. If the original packaging is un ﬁt for use or not available, use

the following packaging guidelines:

Preparation for Shipment

1. Use a c orrugated cardboard shipping

carton having inside dimensions at

least one inch greater than the probe

dimensions. The box should have a carton

test strength of at least 200 pounds.

2. Put the probe into an antistatic bag or wrap

it to protect it from dampness.

3. Place the probe into the box and stabilize it

with light packing material.

4. Seal the carto n with shipping tape.

5. Refer to Contacting Tektronix at the

beginning of this manual for the shipping

address.

TDP0500 & TDP1000 Quick Start User Manual ix