User Manual

Table of Contents

TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual

List of Tables

Table 1--1: Amplifier op tions 1--3................................

Table 1 --2: Service options 1-- 3..................................

Table 3--1: Unpowered circuit degauss limits 3--1...................

Table 3--2: Automobile charging systems test setup 3--11.............

Table 3--3: Troubleshooting 3--19.................................

Table 3--4: Amplifier error codes 3--23.............................

Table 4--1: Warranted TCPA300 and TCPA400 specifications 4--1....

Table 4 --2: Nominal and typical amplifier characteristics 4-- 2........

Table 4--3: TCPA300 and TCPA400 mechanical characteristics 4--3...

Table 4--4: Probe mechanical characteristics 4--4...................

Table 4 --5: Shipping weights and dimensions 4-- 4...................

Table 4--6: Environmental characteristics 4--5.....................

Table 4--7: Certifications and compliances 4--6.....................

Table 5--1: Amplifier checks 5--1.................................

Table 5--2: Probe performance verification checks 5--1..............

Table 5 --3: Required test equipment 5-- 3.........................

Table 5 --4: Equipment settings 5-- 7..............................

Table 5--5: DC gain accuracy test for the TCPA300 and TCPA400 5--7.

Table 5 --6: Equipment settings for bandwidth check 5-- 9............

Table 5 --7: TCPA300 bandwidth measurements 5 --11................

Table 5 --8: TCPA400 bandwidth measurements 5 --11................

Table 5--9: TCPA300 AC coupling measurements 5--13...............

Table 5 --10: Maximum current ratings for

TCPA300-compatible probes 5--15............................

Table 5 --11: Required test equipment 5-- 20.........................

Table 5--12: Equipment settings for DC gain accuracy 5--21...........

Table 5--13: DC gain accuracy test for the TCP305 and T CP312 5--23..

Table 5 --14: Equipment settings for rise time 5-- 25..................

Table 5 --15: Equipment settings for bandwidth 5--27.................

Table 5--16: Bandwidth test for the TCP305 and TCP312 5--28........

Table 5 --17: Required test equipment 5-- 32.........................

Table 5--18: Equipment settings for DC gain accuracy 5--33...........