User Manual

Repair
4. Separate the two halves of the
compensation box enclosure.
5. If you a re o nly replacing the switch panel,
remove the metal shield from the ma in
assembly.
6. Release the connector to disconnect
the panel cable, replace it, and then
reassemble the compensation box.
7. If you are replacing the cab le or
compensation box, disconnect the cable
connector.
8. Install the new cable or compensation box
by performing this procedure in reverse. If
youarereplacingthecable,referalsotothe
Cable/Circuit Board Assembly procedure
to complete the cable replacement.
78 TCP0150 Current Probe Instruction Manual