User Manual

ManualsBrandsTektronix ManualsCurrent / Clamp Test ProbesCurrent Probe 20MHz 25 A ... 150 A TekVPI Probe Interface

Performance Veriﬁcation

6. Do n ot clamp the current pro be around

any conductor, but make sure the jaws are

locked shut.

7. Press the probe Degauss/AutoZero button.

Wait for the De gauss/AutoZero routine to

complete before proceed ing. The routine

is complete when the indicator light turns

green.

8. Clamp the current probe around the 5 turn

current loop as shown. Maintain proper

polarity; the arrow-shaped in dicator on the

probe points away from the (+) terminal o f

the current source.

9. Set the probe range to 25 A.

10. Set the current so urce output to +2.50 A.

11. Enable t he output of the current source.

62 TCP0150 Current Probe Instruction Manual