User Manual

Functional Check and Basic Operation
Functional Check and Basic Operation
The following procedure checks that your probe is functioning properly. To verify that your probe meets the warranted specifications,
refer to the Performance Verification procedures. (See page 57.)
1. Connect the probe to any chan nel (1–4) of
the oscilloscope.
2. Press the Degauss/Au toZero bu tton.
3. When the Degauss/AutoZero LED glows
green, connect the probe to your circuit.
4. Set the oscilloscope to display the probe
channel.
5. Adjust the oscilloscope or press Autoset
to display a stable waveform.
A stable waveform indicates that yo ur
probe is functioning correctly.
16 TCP0150 Current Probe Instruction Manual