User Manual

Installation
Degaussing the Probe
1. After the probe is identified by the host
instrument:
The screen display prompts you to
degauss the probe
The multicolor Degauss/AutoZero
status LED on the probe flashes red
NOTE. The DC gain and offset are not
guaranteed when this LED flashes red.
2. With no conductor in the jaw, lock the
probe slide.
3. Press the Degauss/AutoZero b u tton on
the probe or in the Degauss window on the
host instrument.
4. The m ulticolor Degauss/AutoZero s tatus
LED glows green to indicate a successful
degauss routine w as run, and that the
probe is in normal operating mode.
4 TCP0150 Current Pro be Instruction Ma nual