User Manual

Installation
Using the Probe Head
1. The U-shaped current-sensing core (the
jaw) is located at the front of the probe.
CAUTION. To prevent risk of fire, do not
connect or disconnect the current probe to or
from a live, uninsulated conductor. The core
is not insulated. When you test un insulated
circuits, remove power before you connect or
disconnect the probe .
2. The trigger at the rear of the prob e opens
and closes the sliding bar over the jaw and
the conductor under test.
3. Keep your hands behind the tactile barrier
(away from the shaded area) when
connected to live circuitry.
WARNING. To prevent risk of electric shock,
keep your hands behind the tactile barrier
which indicates the limit of safe access.
4. Press the lock switch up to lock the slide
and down to unlock it.
TCP0150 C urren t Probe Instruction Manual 3