User Manual

Installation
Installation
1. Slide the probe into the TekVPI receptacle.
The probe sn aps in when fully engaged.
When the probe is connected, the host
instrument reads information from the
probe and identifies the d evice. All of the
probe LEDs light briefly for a quick visual
check.
2. To disconnect, press the latch button and
pull the probe away from the instrume nt.
NOTE. Your TekVPI instrument may require a
firmware upgrade to suppo rt full functiona lity
of the probe.(See page 55, Oscilloscope
Firmware.)
CAUTION. To prevent the compensation box
from overheating, ensure that all ventilation
openings are unobstructed when connected to
the oscilloscope.
2 TCP0150 Current Pro be Instruction Ma nual