Datasheet

Specifications
Warranted characteristics
Bandwidth DC to ≥20 MHz (-3 dB). Derate with frequency. See Figure 1. (Calculated from Rise Time BW = .35/Rise Time)
Rise time ≤17.5 ns
Max RMS current 150 A
Max peak pulse current 500 A
Minimum sensitivity 5 mA (on oscilloscope's 1 mV/div setting)
AC coupling (on oscilloscopes that support AC/DC coupling)
Current ranges 25 A and 150 A
Max bare-wire voltage 600 V
RMS
CAT I and II
300 V
RMS
CAT III
Typical characteristics
DC accuracy ±1% typical (3% warranted)
Max amp-second product
25 A range 3,000 aµs
150 A range 15,000 aµs
Insertion impedance 0.03 Ω at 1 MHz
0.075 Ω at 5 MHz
.125 at 10 MHz
.3 at 20 MHz
Signal delay ≈ 21 ns
Displayed RMS noise ≤500 μA
RMS
(probe only)
Physical characteristics
Cable length 2 meters (79 in.)
Probe head size
Length 26.8 cm (10.55 in.)
Width 4.1 cm (1.6 in.)
Height 15.6 cm (6.13 in.)
Max conductor diameter 21 mm x 25 mm (0.83 in. x 1.0 in.)
Shipping weight .7865 kg (1.734 lb.)
Power requirements TCP0150 is powered directly by oscilloscopes with the TekVPI interface
Datasheet
2 www.tektronix.com