Datasheet

Specifications
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Electrical characteristics
Bandwidth DC to ≥120 MHz
Rise time ≤2.92 ns
Maximum DC current 30 A
Maximum RMS current 30 A
Maximum peak pulse current 50 A
Maximum bare wire voltage 150 V CAT II, (insulated wire 300 V CAT II)
Sensitivity 1 mA (on oscilloscopes that support 1 mV/div setting)
DC accuracy ±3% warranted
Accuracy, typical DC: ±1% of reading
DC to 60 Hz, ≤5 A: ±1%
60 Hz – 5 kHz, ≤5 A: ±1.5%
DC – 5 kHz, >5 A: ±1.5%
Maximum Amp-Second product 500 A*µs (in 30 A range)
Insertion impedance 1 mΩ at 10 kHz
3.5 mΩ at 100 kHz
0.08 Ω at 1 MHz
0.15 Ω at 10 MHz
0.7 Ω at 100 MHz
0.85 Ω at 120 MHz
Signal delay 14.5 ns
Current ranges 5 A and 30 A
Power requirements TCP0030A is powered directly by oscilloscopes with the TekVPI
™
interface. Note: For best support, download and install the latest
version of the oscilloscope software from www.tek.com.
Datasheet
2 www.tek.com