User manual

TekSmartLabTBX3000A, TSL3000B User Manual
Saving the Test Result
Saving test results by Students
1. Connect the cellphone or computer to the TekSmartLab™ network.
2. Scan the QR code a mobile device or enter the web page address of the bench in
the Web browser to see the web page of the bench.
The following figure is displayed if you logged in with your mobile phone. The Course
Name shows the name of the current (active) course. All saved test results are associated
with the current course, so the Course Name must not be blank.
Figure 106: Log in the bench web page
There are two ways to save the results:
You can click Retrieve Scope Image to get the oscilloscope snapshot directly,
but the results wont be saved in the server.
You can log in to the server to save the results in the server by following these
steps:
a. Enter Name and ID.
b. Click Login to visit the page, as shown in the following figure.
82 TekSmartLab User Manual