User manual

TekSmartLab™ TBX3000A, TSL3000B User Manual
5. Select the instrument to be configured and set the parameters.
NOTE: Only the instruments properly connected to the server can be configured.
In the following figure, the arbitrary function generator (AFG) and oscilloscope (Scope) are
configured. The digital multimeter (DMM) and power supply (PWS) are selected, and their
Reset boxes are selected.
Figure 104: Configuring instruments
6. Choose the bench to be configured, and click Apply.
The configuration is distributed to the chosen bench. If the configuration works, the
configured bench is displayed in green.
7. Click Save, and the newly created course along with its configurations is saved as
you can see on the home screen based on courses below. The newly configured
course now displayed as the Current Course.
Figure 105: Newly created course on the home screen
TekSmartLab User Manual 81