User manual

TekSmartLabTBX3000A, TSL3000B User Manual
Important safety information
This manual contains information and warnings that must be followed by the user for safe
operation and to keep the product in a safe condition. To safely perform service on this
product, additional information is provided at the end of this section. (See Service safety
summary.)
General safety summary
Use the product only as specified. Review the following safety precautions to avoid injury
and prevent damage to this product or any products connected to it. Carefully read all
instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally
accepted safety procedures in addition to the safety precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the cover
for repair, maintenance, or adjustment.
This product is not intended for detection of hazardous voltages.
While using this product, you may need to access other parts of a larger system. Read the
safety sections of the other component manuals for warnings and cautions related to
operating the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
To avoid fire or personal injury
Use proper power cord. Use only the power cord specified for this product and certified
for the country of use.
Do not use the provided power cord for other products.
Ground the product. This product is grounded through the grounding conductor of the
power cord. To avoid electric shock, the grounding conductor must be connected to earth
ground. Before making connections to the input or output terminals of the product, make
sure that the product is properly grounded.
Power disconnect. The power cord disconnects the product from the power source. See
instructions for the location. Do not position the equipment so that it is difficult to operate
TekSmartLab User Manual iii