User manual

TekSmartLab™ TBX3000A, TSL3000B User Manual
10. Select the benches to be configured before you click Apply.
You can select or deselect one bench, multiple benches, or all benches. The
shadow underneath the number icon means that the bench is selected.
Figure 72: Benches selection
Click Apply to distribute the configurations to the chosen benches. You can also click
Capture to capture the current configuration of a selected bench (only one bench can be
chosen). You can then copy the configuration of this bench to other benches.
When the number icon of a bench turns green, the configuration is successful. If the icon
turns red, select the bench and repeat the configuration. If the icon stays red, please
check the cable connection, and then restart the instruments and the TBX3000A. If the
fault is still not cleared, please perform a self-check of the instrument by referring to
product user manual.
58 TekSmartLab User Manual